Model: heat-detector
Heat detector
HEAT DETECTOR Model:JTW-BD-885 It is used with compatible fire alarm controller for monitoring the initial fire alarm status of environmental condition. Certification: CCS, CCC
Request QuoteJTW-BD-885 heat detector utilizes a state-of-the-art thermistor sensing circuit for fast response. It is a 2-wire plug-in rate-of-rise thermal detector with fixed temperature (60°C) alarm. It is designed to provide open area protection and to be used with compatible controller only.
Features:
- Easy to install, Easy to use.
- Monitor the fire alarm status
- Simple wiring
- Simple maintenance
- Low fault rate
- Reliable and cost-effective
Technical Data:
Outline Drawing:
Specifications
Operating Temperature Range-10°C～50°C (14°F ～131°F)
Operating Humidity Range5% ～ 95% Relative Humidity, Non-condensing
Operating Voltage Range8.5～35VDC
Max. Ripple Voltage30%(Peak to Peak)
Standby Current:≤90μA
Alarm Current:10mA ～130mA
Latching Alarm:Reset by momentary power interruption (0.3s Max., 2.5VDC Min.)
Sensitivity:60°C Fixed, Responds to greater than 8.3°C / min (Rate-of-Rise)
Power-up Time≤5 Sec.
Diameter102.5 mm (installed in DZ-B801 Base)
Height47 mm (installed in DZ-B801 Base)
WeightAbout 95 g
IP ClassIP44