Yorunn Marine
EN
Products/Explosion-proof smoke detector
JTY-GD-2151EIS Explosion-proof smoke detector
Explosion-proof smoke detector
Model: explosion-proof-smoke-detector

Explosion-proof smoke detector

EXPLOSION-PROOF SMOKE DETECTOR Model:JTY-GD-2151EIS It is used with compatible fire alarm controller for monitoring the initial fire alarm status of hazardous environmental condition. Certification: C

Request Quote

JTY-GD-2151EIS Explosion-proof smoke detector is a conventional 2-wire intrinsically safe thermal detector. This detector is designed to provide open area protection and to be used with compatible controller (or interface module) only. Each detector is equipped with two LEDs that provide a local, visual indication of detector status. Once the detector senses a fire, it latches in alarm and remains in this condition until it is reset by a momentary power interruption. The detector can be tested by activating an internal reed switch with a test magnet.

Features:

  • Easy to install, Easy to use.
  • Monitor the fire alarm status
  • Simple wiring
  • Simple maintenance
  • Low fault rate
  • Reliable and cost-effective
  • Suitable for hazardous area

Technical Data:

Outline Drawing:

Specifications

Operating Temperature Range-10°C～50°C (14°F ～131°F)
Operating Humidity Range10% ～ 95% Relative Humidity, Non-condensing
Operating Voltage Range8.5～35VDC(must be supplied by the safety barrier)
Max. Ripple Voltage30%(Peak to Peak)
Supervisory Current:60μA Max.
Alarm Current:130mA (Must be limited by control panel)
Latching Alarm:Reset by momentary power interruption
Diameter104 mm (installed in DZ-B401 Base)
Height51 mm (installed in DZ-B401 Base)
Weight88 g
IP ClassIP44
Intrinsic Safety RatingExia IIC T5
Intrinsic Safety ParameterUi:28VDC; Ii:93mA; Pi:0.65w; Ci:0μF; Li:0mH

Request a Quote